Siding Brake Accessories, Radius Trowel & More To Boost Productivity.
Tools To Make You More Money.

I recently bought this Just-Bend Stopper Kit for my Van Mark Mark II TrimMaster brake, and just like their Measuring Gauge kit, this pair of adjustable stoppers will save you time and make bending and cutting metal more enjoyable, especially for repetitive bends and cuts. I've had this kit for more than a few months and I can't imagine using my brake without them now that I've used them for a while and see how much time and trouble they save. No more pulling out the tape rule and pencil to measure and mark every piece of metal that you're going to bend or cut. Just set your stoppers at the depth you want, make your bends/cuts, readjust for the next depth, bend/cut, rinse and repeat. They are truly worth their weight in gold if you're a contractor who owns and uses a metal brake often.

Let me talk a little bit about their construction - they are very well made made of a combination of steel and high-quality anodized aluminum. The thumbscrews are made of what feels and appears to be high-quality metal and NOT some cheap flimsy plastic. They will, without a doubt, hold up to years of daily use.

This kit will literally pay for itself on a single job. Whether it's cutting trim coil, bending Z flashing for deck ledgers, apron flashing, base flashing for horizontal facade transitions, etc. these stoppers will be your best friend and make the process of making these types of bends/cuts 100 times quicker and easier. Don't hesitate if you're on the fence about buying this kit. Get it ... you won't regret it!

BTW, I bought the Just-Bend Measuring Gauge kit at the same time that I made this purchase, and I highly recommend it also as it allows you to make quick, one-off bends/cuts where you still don't want to fool with the hassle of measuring and marking your metal. Both of these kits combined will increase your productivity and make you more money. They really are a no-brainer if you're having to bend metal often.

I recently bought this set of Just-Bend Measuring Gauges for my Van Mark Mark II TrimMaster brake, and the bottom line is that if you do any amount of bending or trim cutting, then these Measuring Gauges will save you time and make bending and cutting metal more enjoyable for you. I bought these and the Just-Bend Material Stopper set at the same time for a whole home build that requires a lot of metal to be bent and cut, and while I've found that I primarily use the Measuring Gauges for bends and trim cuts that aren't repetitive, aka quick one-offs where I don't want to spend time setting up the Just-Bend Material Stopper set (I primarily use the Material Stopper set for repetitive bends and trim cuts), the Measuring Gauges would be just as beneficial for repetitive bends and cuts, saving you a ton of time and almost making the process thoughtless. The amount of time saved and the hassle avoided of having to pull out the tape rule and pencil to measure and mark the metal makes things so much easier and more efficient, especially over the course of a whole home build like the one I'm in the middle of now. I can tell you that now that I've had them for a little while and have really had a chance to put them to good use, I can't imagine using my brake without them. They are truly worth their weight in gold if you're a contractor who owns and uses a metal brake often.

Be aware that it will take you a small amount of time to initially set this kit up. Take your time and follow the installation instructions closely. I made a mistake during the install because I was in a rush to get them set up and ready to go. I reached out to InnovaTools for a resolution, and they went above and beyond what I expected .... extremely fast replies to my questions, and the replies came with truly genuine concern to help me address the issue I was having. Their solution was exceptional in every way and was by far the best customer service I've ever received from any company of any kind.

Rest assured that this will, without a doubt, be a rock solid and worry-free purchase for your business.

One month in and it cuts like new. This tool has increased work production hugely compared to scoring with an olfa knife. I have used the van mark cutting wheels and find this as good or better, certainly easier to use with its 1" offset. This tool paid for itself in the first day, you need one if even if you only rent a brake.

Only used it for 1 day, and don't have much work with aluminum ahead. So wanna write this now. This is a very good tool, cuts like knife in butter. Highly recommended!

Works great only issue I have is the top rollers slightly contact each of the c-frames as it passes them and won’t work on a full length piece

I perched a cutter and a measuring tool for my brake both are 100% worth the money!! Time is money… big thanks to innova tools!!

I hated having nowhere safe to keep my Van Mark cutter. Came across InnovaTools on You Tube and found a solution to my problem. I purchased two of the ‘Tool Holders’ and I now have my cutter safely stored between uses.
Thanks InnovaTools.

So happy I came across this item. Saves so much time…no more measuring, marking and squinting to see the pencil lines. And best of all…Made in Canada !!

Pretty awesome accessories for my brake (van mark 2) worth 100%👌🏻 Fast to cut even faster to measure!! No more tape! Good job innovatools !!!

Most amazing innovation for your sheet metal brake. Worth every single dollar 💵👍

Je savais que j'allais aimer, mais c'est mieux que je pensais. On déplace facilement les équerres de mesure pour s'adapter aux différentes longueurs. J'ai un petit garage encombré et avec ces gabarits je sauve temps et espaces parce que je n'ai plus besoin de mesurer et marquer. J'ai eu un problème de colis incomplets qui a été rapidement réglé et j'ai eu un excellent service après vente. Un outil qui va se rembourser rapidement !

found this company on Instagram and was immediately drawn to the two way cutter, the cost was significantly less then the tapco cutter and it with the ability of it being able to stay on the brake while bending I was really interested. upon receiving my cutter it has continued to exceed my expectations. the ability to cut both ways saves lots of time and the ability to leave it on the brake while bending is amazing. the craftsmanship is excellent and it just runs very smoothly over the brake. would highly recommend purchasing this cutter if you own a brake and do any sort of bending work.

I have owned two different cutters from both leading brake manufacturers. I sold the cutters with the brakes as not really worth keeping. This new cutter is exceptionally designed and performs flawlessly. Plus being bidirectional is just a cherry on top. Thank you for a great tool. No more rough edges, no more going off brake with knife mishaps and no more knifing in general. Definitely time saving and safer. Well done.

Great tool. Easy to use.

Keeps accessories within reach for convenient access. Before I bought this, I was just setting them on the floor or a tool box. Much easier and faster to not have to bend over every time. Well worth it.