Angle Gauge for Innovatools Brake (Coming Soon)

The Innovatools Two-Way Cutting Tool Features

Cuts Both Ways (Bidirectional)

Thanks to the automatic locking / unlocking directional mechanism, this siding brake cutter / trimmer is the first and only bender part-off tool to cut effortlessly in both directions.

Stays On The Brake - No More Handling

Thanks to the automatic locking / unlocking directional mechanism, this siding brake cutter / trimmer is the first and only bender part-off tool to cut effortlessly in both directions.

Tucks Out of the Way

This siding bender cut-off tool automatically retracts to fold on itself. By doing so, it does not interfere with the bending process.

Cuts with 1" Offset on Tapco* And Van Mark** Brakes

Two different models to fit Tapco* or Van-Mark** benders.Cut at 1 inch offset on Tapco* and Van Mark** brakes. This varies slightly based on the accuracy of your brake.

Lightweight

The InnovaTools Two-way Cutting Tool only weighs 4.3 lbs compared to other brands which weigh anywhere from 7.5 to 8.5lbs

Quality Components

High quality sealed roller bearings and Stainless steel fasteners.
Complete cutter body is made of CNC machined quality aluminum parts to ensure accuracy and strength.

Long Lasting

Anodized aluminum triple cutting wheel body and tracking pulleys for increased longevityZinc plated tool steel cutting wheels are heat treated and ground sharp to ensure long lasting accurate cutting edge

Made Locally

The bidirectional siding brake cutter has been designed by contractors for contractors and is 100% proudly made in Canada / North America

Fits on & Works with Tapco* SideWinder

You can also use our two way cutter to cut coil stock lengths off your Tapco* Side-Winder accessory, the same you use it to bent trim pieces

Fits on & Works with VanMark** Coil Dispenser

You can also use our two way cutter to cut coil stock lengths off your Van Mark** Coil Dispenser accessory, the same you use it to bent trim pieces

Fits On & Works Most Tapco* Brakes

• PRO 14
• PRO 14 HD
  
• PRO 19
• PRO 50
• MAX-I-MUM XL
• MX Series

Fits On & Works Most Van Mark** Brakes

• Mark I Contractor
• Mark I HD Residental
• Mark II TrimMaster Contractor
• Mark II TrimMaster Residential HD
• Mark IV Industrial TrimMaster
• Metal Master 20 Contractor
• Metal Master 20 Residential HD
• Industrial Metal Master 20

Does Not Work With The Following Brakes

• Does Not Work With The Following Brakes
• Tapco* Windy (PORT-O-BRAKE)

How to Use The InnovaTools Two-Way Cut-Off Tool

•  Use a scrap piece of material to practice by clamping it down in the brake with your cut line at a 1 inch setback from the anvil.
• Mount the red pulley wheels of the cutting tool onto the guiding tracks on your brake anvil.
• Pull the handle downwards to pivot the assembly in front of the hinge while rotating the red cutters body towards the desired cutting direction.
• Keep hands and fingers clear of the cutting wheels and from any material exiting the tool during use.
• Push the cutting tool through the material while applying downward and directional pressure in a continuous motion.
• When your cut is completed, bring up the handle. The spring will keep the assembly up and the magnet will pull the plunger behind the back plate allowing the red cutters body to rotate back to its neutral position.
• Repeat the same steps in the opposite direction when ready.
• Tell your friends about your new tool and post about it on social media while tagging us!

Innovatools Two-Way Cutting Tool Videos

The Two-Way cut-off tool cutting through 24 Gauge Stainless Steel sheet

Cut coil stock easily and conveniently with InnovaTools' Two-Way Cutting Tool for siding brakes