





















































Industry's Only Fully Modular Brake
- Choose the length that suits your needs and add or remove modules to modify the length in the future.
- Upgrade the bending capacity from Contractor Grade to Heavy Duty Grade by adding Power Plates.
- Easily and quickly replace individual components instead of entire sections for cost savings.
- Choose from 36" and 42" modules to customize the length of your brake.
- Add best-in-class Innovatools accessories to gain efficiency and accuracy from your brake
Superior Bending Capacity
- HollowCore extrusion design provides increased strength and structural rigidity in a lightweight design compared to conventional single-wall extrusions.
- UniLock Connectors seamlessly join extrusions, creating a structural connection that distributes force evenly and offers stronger structure than a single-piece constructions.
- The PowerPlate frames in our brakes are made from solid aluminum, unlike the traditional C-Frames on portable brakes which are made of cast material.
Exclusive 24" Throat Depth
- Industry's deepest throat which allows you to completely insert sheets up to 24" wide and allows you to cut a 48'' wide sheet in the middle
Product information
Warranty for Innovatools Modular Brake & Accessories
Warranty Period
Coverage
What is Covered
- Defects in product materials and workmanship.
- Repair or replacement of the product or parts thereof.
What is Not Covered
- Damage due to improper use, abuse, accident, or negligence.
- Wear and tear from normal usage.
- Unauthorized modifications or repairs.
- Damage caused by external factors (e.g., fire, flood, other acts of nature).
- We will not cover loss profits / revenues based on any warranty claims.
- If a claim is deemed unsatisfactory, Innovatools will cover the return shipping costs of the faulty product (in the original unassembled state) and issue a refund upon receipt of the returned item.
Limitations and Exclusions
This warranty is void if the product is misused, altered, or tampered with. This warranty does not cover any incidental or consequential damages connected with the use of the product.
Limitation of Liability
The manufacturer’s liability under this warranty shall not exceed the purchase price paid for the product. Under no circumstances will the manufacturer be responsible for any special, incidental, or consequential damages resulting from the use of this product.
How to Obtain Warranty Service
To obtain warranty service, contact us at 1 (613) 978-2637 during the warranty period. Please have your proof of purchase and description of the problem ready when you call.
Warranty Service Contact Information
Innovatools 109 Clement St. Vars, Ontario K0A 3H0 Canada
1 (613) 978-2637 service@innovatools.ca
Innovatools Shipping Policy
Fullfilment
- Orders are fulfilled within 1-2 business days.
- All orders are shipped directly from our factory at 109 Clement st, Vars, Ontario, Canada, K0A 3H0
- Tracking information is provided at the time of shipping
Rates & Times for Canada
- Free door to door UPS standard shipping included
- Delivery time for standard UPS shipping in Canada is typically 2-6 days, depending on your location
- Expedited shipping option available at checkout for an additional cost
- Delivery time for expedited shipping in Canada is typically 1-4 days, depending on your location
- A signature is required for orders over $500. If you are not available to sign for the package(s) the Courier will take it shipment to the closest pick up location so that you can pick up your order in person at your convenience within one week.
Rates & Times for The U.S.A
- Free door to door UPS standard shipping included
- US CUSTOMERS: Purchase Worry-Free, pricing includes Tariffs, brokerage, custom and duty fees. The price you pay is the price landed at your door step, no unpleasant surprise.
- Delivery time for regular shipping in the USA is typically 3-7 days, depending on your location
- Expedited shipping option available at checkout for an additional cost
- Delivery time for expedited shipping is typically 2-4 days for continental US, depending on your location
- A signature is required for orders over $500. If you are not available to sign for the package(s) the Courier will take it shipment to the closest pick up location so that you can pick up your order in person at your convenience within on week
- Tax ID (business OR personal) is required on orders over $2,500 as per U.S. Customs and Border Protection import policy https://www.help.cbp.gov/s/article/Article-1118?language=en_US We will contact you by email to get this.
Rates & Times for All Other Countries
- Free door-to-door worldwide UPS Expedited shipping worldwide included, where UPS service is available
- Delivery time for expedited shipping to most worldwide locations is typically 5-10 days. Depending on your location it may take longer for some countries.
- Express shipping option available at checkout for an additional cost
- Delivery time for Express shipping worldwide is typically 4-6 days. Depending on your location it may take longer for some countries.
- A signature is required for orders over $500. If you are not available to sign for the package(s) the Courier will take it shipment to the closest pick up location so that you can pick up your order in person at your convenience within one week.
- Local customs, brokerage, duties, tariffs and taxes may apply depending on your location and are the buyer's responsibility. Please check with your local customs authorities for more information for importing into your specific country.
- Our products are 100% made in Canada and fall under the CETA agreement between Canada and the European Union eliminating duties on Tariffs. Find out if it is applicable to your country here: https://policy.trade.ec.europa.eu/eu-trade-relationships-country-and-region/countries-and-regions/canada/eu-canada-agreement_en
Returns & Refunds
Eligibility for Return
- Items must be in their original condition, and with all original packaging and repackaged as we shipped them to you.
- Certain items such as custom made products, are not eligible for return.
How to Return
- Contact us at return@innovatools.ca within 60 days of your purchase.
- Provide your order number and the reason for the return.
- We’ll send you a return shipping label (if applicable) and instructions on how to return your item.
Refunds
Shipping Costs
The Innovatools Two-Way Cutting Tool Features
Cuts Both Ways (Bidirectional)
Thanks to the automatic locking / unlocking directional mechanism, this siding brake cutter / trimmer is the first and only bender part-off tool to cut effortlessly in both directions.
Stays On The Brake - No More Handling
Thanks to the automatic locking / unlocking directional mechanism, this siding brake cutter / trimmer is the first and only bender part-off tool to cut effortlessly in both directions.
Tucks Out of the Way
This siding bender cut-off tool automatically retracts to fold on itself. By doing so, it does not interfere with the bending process.
Cuts with 1" Offset on Tapco* And Van Mark** Brakes
Two different models to fit Tapco* or Van-Mark** benders.Cut at 1 inch offset on Tapco* and Van Mark** brakes. This varies slightly based on the accuracy of your brake.
Lightweight
The InnovaTools Two-way Cutting Tool only weighs 4.3 lbs compared to other brands which weigh anywhere from 7.5 to 8.5lbs
Quality Components
High quality sealed roller bearings and Stainless steel fasteners.
Complete cutter body is made of CNC machined quality aluminum parts to ensure accuracy and strength.
Long Lasting
Anodized aluminum triple cutting wheel body and tracking pulleys for increased longevityZinc plated tool steel cutting wheels are heat treated and ground sharp to ensure long lasting accurate cutting edge
Made Locally
The bidirectional siding brake cutter has been designed by contractors for contractors and is 100% proudly made in Canada / North America
Fits on & Works with Tapco* SideWinder
You can also use our two way cutter to cut coil stock lengths off your Tapco* Side-Winder accessory, the same you use it to bent trim pieces
Fits on & Works with VanMark** Coil Dispenser
You can also use our two way cutter to cut coil stock lengths off your Van Mark** Coil Dispenser accessory, the same you use it to bent trim pieces

Fits On & Works Most Tapco* Brakes
- PRO 14
- PRO 14 HD
- PRO 19
- PRO 50
- MAX-I-MUM XL
- MX Series
Fits On & Works Most Van Mark** Brakes
- Mark I Contractor
- Mark I HD Residental
- Mark II TrimMaster Contractor
- Mark II TrimMaster Residential HD
- Mark IV Industrial TrimMaster
- Metal Master 20 Contractor
- Metal Master 20 Residential HD
- Industrial Metal Master 20
Does Not Work With The Following Brakes
- Does Not Work With The Following Brakes
- Tapco* Windy (PORT-O-BRAKE)
How to Use The InnovaTools Two-Way Cut-Off Tool
- Use a scrap piece of material to practice by clamping it down in the brake with your cut line at a 1 inch setback from the anvil.
- Mount the red pulley wheels of the cutting tool onto the guiding tracks on your brake anvil.
- Pull the handle downwards to pivot the assembly in front of the hinge while rotating the red cutters body towards the desired cutting direction.
- Keep hands and fingers clear of the cutting wheels and from any material exiting the tool during use.
- Push the cutting tool through the material while applying downward and directional pressure in a continuous motion.
- When your cut is completed, bring up the handle. The spring will keep the assembly up and the magnet will pull the plunger behind the back plate allowing the red cutters body to rotate back to its neutral position.
- Repeat the same steps in the opposite direction when ready.
- Tell your friends about your new tool and post about it on social media while tagging us!
This is your heading text.
The Two-Way Cut-off Tool Features

Cut coil stock easily and conveniently with InnovaTools' Two-Way Cutting Tool for Tapco* & Van Mark** siding brakes

The Two-Way cut-off tool cutting through 24 Gauge Stainless Steel sheet
Innovatools Two-Way Cutting Tool Videos

The Two-Way cut-off tool cutting through 24 Gauge Stainless Steel sheet

Cut coil stock easily and conveniently with InnovaTools' Two-Way Cutting Tool for siding brakes
This is your heading text.
The Innovatools Two-Way Cutting Tool Features
Cuts Both Ways (Bidirectional)
Thanks to the automatic locking / unlocking directional mechanism, this siding brake cutter / trimmer is the first and only bender part-off tool to cut effortlessly in both directions.
Stays On The Brake - No More Handling
Thanks to the automatic locking / unlocking directional mechanism, this siding brake cutter / trimmer is the first and only bender part-off tool to cut effortlessly in both directions.
Tucks Out of the Way
This siding bender cut-off tool automatically retracts to fold on itself. By doing so, it does not interfere with the bending process.
Cuts with 1" Offset on Tapco* And Van Mark** Brakes
Two different models to fit Tapco* or Van-Mark** benders.Cut at 1 inch offset on Tapco* and Van Mark** brakes. This varies slightly based on the accuracy of your brake.
Lightweight
The InnovaTools Two-way Cutting Tool only weighs 4.3 lbs compared to other brands which weigh anywhere from 7.5 to 8.5lbs
Quality Components
High quality sealed roller bearings and Stainless steel fasteners.
Complete cutter body is made of CNC machined quality aluminum parts to ensure accuracy and strength.
Long Lasting
Anodized aluminum triple cutting wheel body and tracking pulleys for increased longevityZinc plated tool steel cutting wheels are heat treated and ground sharp to ensure long lasting accurate cutting edge
Made Locally
The bidirectional siding brake cutter has been designed by contractors for contractors and is 100% proudly made in Canada / North America
Fits on & Works with Tapco* SideWinder
You can also use our two way cutter to cut coil stock lengths off your Tapco* Side-Winder accessory, the same you use it to bent trim pieces
Fits on & Works with VanMark** Coil Dispenser
You can also use our two way cutter to cut coil stock lengths off your Van Mark** Coil Dispenser accessory, the same you use it to bent trim pieces

Fits On & Works Most Tapco* Brakes
- PRO 14
- PRO 14 HD
- PRO 19
- PRO 50
- MAX-I-MUM XL
- MX Series
Fits On & Works Most Van Mark** Brakes
- Mark I Contractor
- Mark I HD Residental
- Mark II TrimMaster Contractor
- Mark II TrimMaster Residential HD
- Mark IV Industrial TrimMaster
- Metal Master 20 Contractor
- Metal Master 20 Residential HD
- Industrial Metal Master 20
Does Not Work With The Following Brakes
- Does Not Work With The Following Brakes
- Tapco* Windy (PORT-O-BRAKE)
How to Use The InnovaTools Two-Way Cut-Off Tool
- Use a scrap piece of material to practice by clamping it down in the brake with your cut line at a 1 inch setback from the anvil.
- Mount the red pulley wheels of the cutting tool onto the guiding tracks on your brake anvil.
- Pull the handle downwards to pivot the assembly in front of the hinge while rotating the red cutters body towards the desired cutting direction.
- Keep hands and fingers clear of the cutting wheels and from any material exiting the tool during use.
- Push the cutting tool through the material while applying downward and directional pressure in a continuous motion.
- When your cut is completed, bring up the handle. The spring will keep the assembly up and the magnet will pull the plunger behind the back plate allowing the red cutters body to rotate back to its neutral position.
- Repeat the same steps in the opposite direction when ready.
- Tell your friends about your new tool and post about it on social media while tagging us!
This is your heading text.
The Two-Way Cut-off Tool Features

Cut coil stock easily and conveniently with InnovaTools' Two-Way Cutting Tool for Tapco* & Van Mark** siding brakes

The Two-Way cut-off tool cutting through 24 Gauge Stainless Steel sheet
Innovatools Two-Way Cutting Tool Videos

The Two-Way cut-off tool cutting through 24 Gauge Stainless Steel sheet

Cut coil stock easily and conveniently with InnovaTools' Two-Way Cutting Tool for siding brakes
This is your heading text.
The Innovatools Two-Way Cutting Tool Features
Cuts Both Ways (Bidirectional)
Thanks to the automatic locking / unlocking directional mechanism, this siding brake cutter / trimmer is the first and only bender part-off tool to cut effortlessly in both directions.
Stays On The Brake - No More Handling
Thanks to the automatic locking / unlocking directional mechanism, this siding brake cutter / trimmer is the first and only bender part-off tool to cut effortlessly in both directions.
Tucks Out of the Way
This siding bender cut-off tool automatically retracts to fold on itself. By doing so, it does not interfere with the bending process.
Cuts with 1" Offset on Tapco* And Van Mark** Brakes
Two different models to fit Tapco* or Van-Mark** benders.Cut at 1 inch offset on Tapco* and Van Mark** brakes. This varies slightly based on the accuracy of your brake.
Lightweight
The InnovaTools Two-way Cutting Tool only weighs 4.3 lbs compared to other brands which weigh anywhere from 7.5 to 8.5lbs
Quality Components
High quality sealed roller bearings and Stainless steel fasteners.
Complete cutter body is made of CNC machined quality aluminum parts to ensure accuracy and strength.
Long Lasting
Anodized aluminum triple cutting wheel body and tracking pulleys for increased longevityZinc plated tool steel cutting wheels are heat treated and ground sharp to ensure long lasting accurate cutting edge
Made Locally
The bidirectional siding brake cutter has been designed by contractors for contractors and is 100% proudly made in Canada / North America
Fits on & Works with Tapco* SideWinder
You can also use our two way cutter to cut coil stock lengths off your Tapco* Side-Winder accessory, the same you use it to bent trim pieces
Fits on & Works with VanMark** Coil Dispenser
You can also use our two way cutter to cut coil stock lengths off your Van Mark** Coil Dispenser accessory, the same you use it to bent trim pieces

Fits On & Works Most Tapco* Brakes
- PRO 14
- PRO 14 HD
- PRO 19
- PRO 50
- MAX-I-MUM XL
- MX Series
Fits On & Works Most Van Mark** Brakes
- Mark I Contractor
- Mark I HD Residental
- Mark II TrimMaster Contractor
- Mark II TrimMaster Residential HD
- Mark IV Industrial TrimMaster
- Metal Master 20 Contractor
- Metal Master 20 Residential HD
- Industrial Metal Master 20
Does Not Work With The Following Brakes
- Does Not Work With The Following Brakes
- Tapco* Windy (PORT-O-BRAKE)
How to Use The InnovaTools Two-Way Cut-Off Tool
- Use a scrap piece of material to practice by clamping it down in the brake with your cut line at a 1 inch setback from the anvil.
- Mount the red pulley wheels of the cutting tool onto the guiding tracks on your brake anvil.
- Pull the handle downwards to pivot the assembly in front of the hinge while rotating the red cutters body towards the desired cutting direction.
- Keep hands and fingers clear of the cutting wheels and from any material exiting the tool during use.
- Push the cutting tool through the material while applying downward and directional pressure in a continuous motion.
- When your cut is completed, bring up the handle. The spring will keep the assembly up and the magnet will pull the plunger behind the back plate allowing the red cutters body to rotate back to its neutral position.
- Repeat the same steps in the opposite direction when ready.
- Tell your friends about your new tool and post about it on social media while tagging us!
This is your heading text.
The Two-Way Cut-off Tool Features

Cut coil stock easily and conveniently with InnovaTools' Two-Way Cutting Tool for Tapco* & Van Mark** siding brakes

The Two-Way cut-off tool cutting through 24 Gauge Stainless Steel sheet
Innovatools Two-Way Cutting Tool Videos

The Two-Way cut-off tool cutting through 24 Gauge Stainless Steel sheet

Cut coil stock easily and conveniently with InnovaTools' Two-Way Cutting Tool for siding brakes
This is your heading text.

Customer Reviews
Modular Aluminum Brake Features

Industry's only Modular Brake
Choose the length that suits your needs and add or remove modules to modify the length in the future
Upgrade the bending capacity from a Contractor Grade brake to a Heavy Duty Grade by adding Power Plates in the future to bend up to 24ga steel, or remove PowerPlates to reduce the weight when you don't need the bending power for easier transportation
The 36" and 42" modules lengths offer the broadest range of brake lenght options available in the industry
Add our best-in-class Innovatools accessories to increase efficiency and improve precision
Stays On The Brake - No More Handling
Thanks to the automatic locking / unlocking directional mechanism, this siding brake cutter / trimmer is the first and only bender part-off tool to cut effortlessly in both directions.
Tucks Out of the Way
This siding bender cut-off tool automatically retracts to fold on itself. By doing so, it does not interfere with the bending process.
Cuts with 1" Offset on Tapco* And Van Mark** Brakes
Two different models to fit Tapco* or Van-Mark** benders.Cut at 1 inch offset on Tapco* and Van Mark** brakes. This varies slightly based on the accuracy of your brake.
Lightweight
The InnovaTools Two-way Cutting Tool only weighs 4.3 lbs compared to other brands which weigh anywhere from 7.5 to 8.5lbs

Superior bending capacity
The PowerPlate frames used on our brakes are made from solid aluminum, unlike the traditional C-Frames used on other portable brakes which are typically made of brittle cast aluminum material.
Our HollowCore extrusions designs provide increased strength and structural rigidity compared to conventional single-wall extrusions allowing us to make our brakes modular.
Our UniLock connector design mechanically joins our modules together seamlessly and precisely, creating a structural connection that distributes force evenly and offering a stronger connection every time.

Exclusive 24" throat depth
We offer the industry's deepest throat which allows you to completely insert sheets up to 24" (61cm) wide and also allows you to cut a 48'' (1.2m) wide sheet in the middle into two equal pieces otherwise not possible

Flexible brake operation
Our locking anvil handle runs along the full length of the brake allowing operation of the clamping anvil from anywhere.
Our movable hinge handles allow you to operate the bending hinge from anywhere on the brake.
The reversible locking anvil mechanism allows you to switch from a pull-to-lock to a push-to-lock motion in minutes so that you can choose what works best for you.
We designed our Accesso-rail to easily mount and relocate a multitude of existing, and future, accessories within reach anywhere along the brake
The Storage mode for our locking anvil handle allows it to recess into PowerPlates for compact transport and extra storage space.

Dual Pivot Motion hinge design
Our Easy Hem Pocket was developed to offer the easiest way to crimp hem bends never seen in the industry before. It makes for the hemming of long pieces of heavier gauge material, by single operator, easier than ever before.
Our 5/8'' hinge setback distance provides the power when needed while allowing tighter bends.
We designed the rotating motion on our bending hinge to have a short throw requiring less movement to achieve the same bending angle than other brakes making bending easier for the operator.
Our hinge design allows for quick and simple maintenance if required.

Advanced design
The Lifetime EasyLock mechanism ensures no shear pressure on pivots when bending power is needed, ensuring long-lasting, wear-free locking power you can rely on.
Our Precision UniLock Connectors have been engineered to ensure strong and reliable structural joining of modules each time.
We CNC-machine our TruLine Bending Edge out of a solid stainless flatbar piece ensuring it is precise, durable and resistant compared to other options available on the market offering a seamless bending edge
Our easy clamping pressure adjustment simply requires a 9/16” (14mm) wrench to adjust and also offers a grading scale for increased precision.
Our brake offers the widest mouth opening available in the industry offering a big 2.5'' (6.4cm) gap to insert or remove bent pieces from your brake easily.
Easily replace individual components instead of entire sections for cost savings.

Easy Assembly
Brake assembly using basic tools will be required upon delivery as brakes ship through regular parcel mail. Brakes are easily assembled within one to two hours following our simple step by step video.
Note: Your Brake can be ordered fully assembled at no extra charge if picked up at our factory.
The 36" and 42" modules lengths offer the broadest range of brake lenght options available in the industry
Add our best-in-class Innovatools accessories to increase efficiency and improve precision
Quality Components
High quality sealed roller bearings and Stainless steel fasteners.
Complete cutter body is made of CNC machined quality aluminum parts to ensure accuracy and strength.
Long Lasting
Anodized aluminum triple cutting wheel body and tracking pulleys for increased longevityZinc plated tool steel cutting wheels are heat treated and ground sharp to ensure long lasting accurate cutting edge
Made Locally
The bidirectional siding brake cutter has been designed by contractors for contractors and is 100% proudly made in Canada / North America
Fits on & Works with Tapco* SideWinder
You can also use our two way cutter to cut coil stock lengths off your Tapco* Side-Winder accessory, the same you use it to bent trim pieces
Fits on & Works with VanMark** Coil Dispenser
You can also use our two way cutter to cut coil stock lengths off your Van Mark** Coil Dispenser accessory, the same you use it to bent trim pieces
Fits On & Works Most Tapco* Brakes
- PRO 14
- PRO 14 HD
- PRO 19
- PRO 50
- MAX-I-MUM XL
- MX Series
Fits On & Works Most Van Mark** Brakes
- Mark I Contractor
- Mark I HD Residental
- Mark II TrimMaster Contractor
- Mark II TrimMaster Residential HD
- Mark IV Industrial TrimMaster
- Metal Master 20 Contractor
- Metal Master 20 Residential HD
- Industrial Metal Master 20
Does Not Work With The Following Brakes
- Does Not Work With The Following Brakes
- Tapco* Windy (PORT-O-BRAKE)
How to Use The InnovaTools Two-Way Cut-Off Tool
- Use a scrap piece of material to practice by clamping it down in the brake with your cut line at a 1 inch setback from the anvil.
- Mount the red pulley wheels of the cutting tool onto the guiding tracks on your brake anvil.
- Pull the handle downwards to pivot the assembly in front of the hinge while rotating the red cutters body towards the desired cutting direction.
- Keep hands and fingers clear of the cutting wheels and from any material exiting the tool during use.
- Push the cutting tool through the material while applying downward and directional pressure in a continuous motion.
- When your cut is completed, bring up the handle. The spring will keep the assembly up and the magnet will pull the plunger behind the back plate allowing the red cutters body to rotate back to its neutral position.
- Repeat the same steps in the opposite direction when ready.
- Tell your friends about your new tool and post about it on social media while tagging us!
Modular Brake Specifications

Maximum Bending Capacity

Brake Dimensions

Brake Weights
You May Also Like
Innovatools Two-Way Cutting Tool Videos

The Two-Way cut-off tool cutting through 24 Gauge Stainless Steel sheet

Cut coil stock easily and conveniently with InnovaTools' Two-Way Cutting Tool for siding brakes
The Two-Way Cut-off Tool Features
Cuts Both Ways (Bidirectional)
Thanks to the automatic locking / unlocking directional mechanism, this siding brake cutter / trimmer is the first and only bender part-off tool to cut effortlessly in both directions.
Stays On The Brake - No More Handling
Thanks to the automatic locking / unlocking directional mechanism, this siding brake cutter / trimmer is the first and only bender part-off tool to cut effortlessly in both directions.
Tucks Out of the Way
This siding bender cut-off tool automatically retracts to fold on itself. By doing so, it does not interfere with the bending process.
Cuts with 1" Offset on Tapco* And Van Mark** Brakes
Two different models to fit Tapco* or Van-Mark** benders.Cut at 1 inch offset on Tapco* and Van Mark** brakes. This varies slightly based on the accuracy of your brake.
Lightweight
The InnovaTools Two-way Cutting Tool only weighs 4.3 lbs compared to other brands which weigh anywhere from 7.5 to 8.5lbs
Quality Components
High quality sealed roller bearings and Stainless steel fasteners.
Complete cutter body is made of CNC machined quality aluminum parts to ensure accuracy and strength.
Long Lasting
Anodized aluminum triple cutting wheel body and tracking pulleys for increased longevityZinc plated tool steel cutting wheels are heat treated and ground sharp to ensure long lasting accurate cutting edge
Made Locally
The bidirectional siding brake cutter has been designed by contractors for contractors and is 100% proudly made in Canada / North America
Fits on & Works with Tapco* SideWinder
You can also use our two way cutter to cut coil stock lengths off your Tapco* Side-Winder accessory, the same you use it to bent trim pieces
Fits on & Works with VanMark** Coil Dispenser
You can also use our two way cutter to cut coil stock lengths off your Van Mark** Coil Dispenser accessory, the same you use it to bent trim pieces

Fits On & Works Most Tapco* Brakes
- PRO 14
- PRO 14 HD
- PRO 19
- PRO 50
- MAX-I-MUM XL
- MX Series
Fits On & Works Most Van Mark** Brakes
- Mark I Contractor
- Mark I HD Residental
- Mark II TrimMaster Contractor
- Mark II TrimMaster Residential HD
- Mark IV Industrial TrimMaster
- Metal Master 20 Contractor
- Metal Master 20 Residential HD
- Industrial Metal Master 20
Does Not Work With The Following Brakes
- Does Not Work With The Following Brakes
- Tapco* Windy (PORT-O-BRAKE)